दरवाजे के कुछ समस्याओं का समाधान
Doors related problems and its solution
Out of many household problems one major one is the problems related to doors in home.Whether its new or old doors some time it creates unbearable problems which must be taken care as soon as possible.
For some problems we call carpenter or helpers and pay them large amount for small problems too which we can already take care by self only.
Paying for small problems is not beneficial for us as it takes away our time and money too.
So I am going to sort out some major problems arising in our home commonly and there solutions to do it yourself.
Here they are:-
![]() |
Door |
- When door can't stay open ,check the hinges .If one has shifted or hinges are loose or if any hinge screw is loose,reset the hinge in its original position and tighten the screws. If a screw cannot be tighten ed because the holes has been stripped or enlarged,remove it,pack the hole with as small piece of wood dipped in PVA adhesive https://www.amazon.in/Tran-PVA-Adhesive-Glue-4-Ounce/dp/B0027A7GT4 reinsert the screw and tighten securely.
- Door Hinge screw
- Quietening the door that slams with noise stick a strip of foam rubber to the edge of the doorstop moulding. Peel and stick foam weather stripping tape works well.A short length of foam near the top and bottom of the frame will often suffice.you can also try a narrow strip of cork or leather.
- To keep a door from slamming against the wall when it opens fit a rubber door stop to the floor. This is the basic solution which everyone already knows.
![]() |
Rubber door stop |
- For child's room we can make an easy door bumper: put a rubber ball in a sock and hang it from inside doorknob.Child cannot close the door accidentally or slam it on the wall.
- In kitchen cabinet doors the self closing hinges make them slam shut.Muffle the noise with bumpers made of silicone rubber sealant.
Bumpers made of Silicone rubber sealant
Put two small blobs of sealant -each about the size of a pencil rubber -on the inside corners of each door,one at the top and the other at the bottom.Then place strips of sticky tape on the cabinet where the sealant makes contact.
Smear each tape strip with a tin film of petroleum jelly to keep the sealant from sticking when the door is closed.and to act as a spacer, tape a small piece of 1/8 in /3 mm thick cardboard to the cabinet between the tape strips.
Close the door ,let the sealant dry overnight,then peel off the tape and cardboard.
Few common things about doors are given above but if you have more problems other than this you can refer to the link below where you can find out all the solutions related to door troubleshooting repairs and many more.




No comments:
Post a Comment